Home Products recover sulphid gold ore

recover sulphid gold ore

GOLD RECOVERY OF REFRACTORY SULFIDE CONCENTRATES USING DIRECT ...

The problem of refractory sulfide gold ore that has a gold recovery less than 50% when direct cyanidation applied, still exists until now. It needs oxidative pretreatment for cyanidation to be effective in gold recovery the objective of this study is figuring out the effect of sodium nitrite as an oxidizing

Chat
Small Scale Treatment of PM Sulfide Ores - Gold Refining ...

I have about 200+ pounds (roughly 100kg) of rich silver gold ore that runs roughly 3 ounces per ton of gold and 70 ounces of silver. On that basis, my 200 pounds should contain about 0.3 ounces of gold and 7 ounces of silver - but I know that I won't get 100% recovery.

Chat
Gold Ore Sorting : TOMRA

Gold ores are typically amenable to sensor-based ore sorting to some degree, and this is usually accomplished with XRT or laser sensors, or a combination of both. A two-step sorting flow-sheet consisting of an XRT rougher plus a laser scavenger (or alternatively, a laser rougher and an XRT scavenger) has already proved an optimal recovery ...

Chat
Refractory Gold | SGS

SGS has very extensive experience with all the unit operations involved in the processing of refractory gold ores, and in selecting the optimum flowsheet for a particular ore. Our gold metallurgy expertise is second to none. Chemical interference. There are two important mechanisms by which gold recovery is through chemical interference.

Chat
Method for recovering gold and other precious metals from ...

Not only is gold sometimes found encapsulated in sulfide minerals in these ores, but these ores also contain carbonaceous matter that interferes with recovery by cyanidation. Gold in carbonaceous ores, therefore, can be associated with sulfide minerals, carbonaceous matter, and/or siliceous minerals.

Chat
Smelting and Roasting Ores to recover gold, silver and other ...

Smelting and Roasting Ores to recover gold, silver and other metals Some prospectors are interested in the methods of processing sulfide ores to extract their values. The two of the best known processes are smelting and roasting. The two are actually different methods, but both involve heating the ore to high temperatures.

Chat
RECOVERY OF GOLD FROM A FREE-MILLING ORE BY CENTRIFUGAL ...

In the first recovery stage 81% of the gold present in the ore was recovered into the concentrate (Con. 1), which was then upgraded by panning to obtain a clean concentrate (Pan Con. 1) with a grade of 1760 g/t Au with 33.8% recovery and 0.4% mass yield .

Chat
GOLD RECOVERY OF REFRACTORY SULFIDE CONCENTRATES USING DIRECT ...

The problem of refractory sulfide gold ore that has a gold recovery less than 50% when direct cyanidation applied, still exists until now. It needs oxidative pretreatment for cyanidation to be effective in gold recovery the objective of this study is figuring out the effect of sodium nitrite as an oxidizing reagent on cyanidation of refractory gold ore.

Chat
17 - Flotation of Gold Ores

sulphide ores, gold may occur in several of the above forms, which affects flotation recovery. During flotation of gold-bearing massive sulphide ores, the emphasis is generally placed on the production of base metal concentrates and gold recovery becomes a secondary consideration.

Chat
WO2014156350A1 - Method for recovering gold from sulfide ore ...

According to the present invention, it is possible to provide a method for recovering gold from sulfide minerals that can suppress a decrease in gold concentration in the solution after gold...

Chat
GOLD RECOVERY OF REFRACTORY SULFIDE CONCENTRATES USING DIRECT ...

The problem of refractory sulfide gold ore that has a gold recovery less than 50% when direct cyanidation applied, still exists until now. It needs oxidative pretreatment for cyanidation to be effective in gold recovery the objective of this study is figuring out the effect of sodium nitrite as an oxidizing reagent on cyanidation of refractory gold ore.

Chat
A new concept of the biohydrometallurgical technology for ...

Gold recovery from the sulfide concentrate by carbon-in-pulp cyanidation was 67.8% in the one-step process and 93.0% in the two-step process at 4 days of biooxidation, while it reached 82.4% and 94.1% in the one-step and two-step processes at 8 days of biooxidation, respectively.

Chat
Gold processing 101 - Mining Magazine

An ore containing 1% sulphur will produce a mass pull of approximately 5% by weight to a bulk flotation concentrate where recovery is the key driver. If this ore also contains 1g/t Au (for GSR =1), and 90% recovery to concentrate is achieved, then 0.90g will be recovered and with a concentration ratio of 20 (5% to concentrate) this corresponds ...

Chat
Gold recovery from a sulphide bearing gold ore by percolation ...

IRTERRO10uRWDIIRRRI Of mmERAL PROCE551nG ELSEVIER Int. J. Miner. Process. 48 (1996) 225-244 Gold recovery from a sulphide bearing gold ore by percolation leaching with thiourea L. 'Tremblay a, G. Desches b, E. Ghali a, J. McMullen M. Lanouette "Department of Mines and Metallurgy, Laval University, Ste-Foy, Que., Canada GI K7P4 b Resource Utilization Laboratory, Mineral Sciences Laboratories ...

Chat
Recovery of Gold in Pyritic Sulfide Ores - Mine Engineer.Com

Recovery of gold in sulfide ores has fallen into several categories. First is froth flotation, and second is cyanidation of the ores. Using cyanide to recover gold from sulfide ores generally results in 30 to 35% recovery, and the best I have heard of is around 50% recovery. The fine coating of a iron compound definitely appears to be a key component of the inability of cyanide to efficiently leach low grade pyritic ores.

Chat
Guides For High-sulfide Gold Processing

High sulfide gold ore refers to a certain gold ore with 20% -30% of gold wrapped by sulfide (mainly pyrite). Because most of the gold in high-sulfide gold ore exists in the form of sulfide-encapsulated gold, when using direct leaching process, the consumption of gold leaching agent and cost of gold leaching production will increase, and gold processing efficiency is not good.

Chat
Sulfides - Gold Recovery Methods - ICMJ's Mining Journal Forums

It all depends on your sulfide product - what you have to leach. Leaching works poorly on coarser gold - it just takes forever to dissolve. Some types of sulfides react badly with leach systems, destroying the leach chemicals. If you have significant silver in your ore, many non-cyanide leach systems dont recover silver.

Chat
Process to Recover Gold from Sulfide Ores - GOLD PROSPECTING ...

I believe it has an application to recover gold from sulphide ores by eliminating the current roasting requirements to oxidize the ore. Assuming we can apply the same amount of energy used in past testing, it equates to 4 cents per ton.

Chat
Recovery of Silver, Gold, and Lead From a Complex Sulfide Ore ...

RECOVERY OF SILVER, GOLD, AND LEAD FROM A COMPLEX SULFIDE ORE USING FERRIC CHLORIDE, THIOUREA, AND BRINE LEACH SOLUTIONS By R. G. Sandberg 1 and J. L. Huiatt 2 ABSTRACT The Bureau of Mines investigated a hydrometallurgical procedure to re­ cover gold, silver, and byproduct lead from a complex lead-zinc sulfide ore.

Chat
Gold Recovery 101 - Sepro Systems

The ultra-fine gold particles associated with sulfide minerals are often too small to recover by gravity and very expensive to liberate by grinding. Typically, sulfide-associated gold is recovered by froth flotation. A typical sulfide-associated gold flowsheet is presented below in Figure 2: Figure 2: Typical sulfide-associated gold process

Chat
How to Use Bleach on Gold Ore to Remove Gold | Sciencing

Gold is an almost non-reactive metal, but halogens chlorine, bromine, fluorine and iodine can dissolve it. Chlorine is the cheapest and lightest product that can achieve this. Bleach is the chemical compound sodium hypochlorite. When combined with hydrochloric acid, the mixture produces chlorine that dissolves gold from gold ore.

Chat
Small Scale Treatment of PM Sulfide Ores - Gold Refining ...

I have about 200+ pounds (roughly 100kg) of rich silver gold ore that runs roughly 3 ounces per ton of gold and 70 ounces of silver. On that basis, my 200 pounds should contain about 0.3 ounces of gold and 7 ounces of silver - but I know that I won't get 100% recovery.

Chat
Experimental work in the recovery of gold from a massive ...

EXPERIMENTAL WORK IN THE RECOVERY OF GOLD FROM A MASSIVE SULPHIDE ORE by Warren C. Cornell CHAPTER 1. INTRODUCTION A msgive sulphide ore is one usually considered to contain, within reasonable variations, over 50 per cent of metallic sulphides with the balance represented by gangue minerals. Among types of massive sulphide ores may be men­

Chat