A new magnetic separator has been made available recently in quantity to research laboratories. This device, the Frantz Isodynamic Separator, has been used for the separation of various non- sulphides from each other. Its application to the separation of sulphides, however, does not seem to have been reported.
Chat
Because the Frantz ® Isodynamic Separator has a virtually un useful life, elements of the LB-1 Magnetic Barrier Laboratory Separator were consequently designed so that all parts can be installed in the base and the magnetic circuit of any Isodynamic Separator to convert it to a Barrier Separator.
Chat
FRANTZ. Magnetic Separator. (Model L-1) Frantz®Low Field Control. (Model LFC-2) An accessory used with either model LB-1 or L-1, providing the conditions required for separating ferromagnetic materials according to differences in their magnetic properties. It is connected in the coil circuit of the separator and comprises means for reversing the direction of the coil current; sensing a zero field condition in ...
Chat
Certainly a Frantz Isodynamic separator will do it if it has structural iron... FeOOH. G. Gringoz. BANNED. Oct 3, 2020 69 2 55. Oct 10, 2020 #47 Ront5353 said:
Chat
Frantz Isodynamic Magnetic separator, Model L-1, table top. Input 115 Volts, 2.5 AMPS, 50/60 Hz, serial number 1770. Note: This is a dry high intensity magnetic separator. Used in minerals research and development lab. Additional Prep Fees May Apply
Chat
The following list (Table 1) and the accompanying chart (Fig. 1) of magnetic susceptibilities of minerals were compiled to fill the need for a guide in separating minerals in an isodynamic magnetic separator, and were especially designed for the occasional do-it-yourself user.
Chat
For example, our Isodynamic ® Separator is universally recognized as the reference standard for geological and mineralogical laboratories worldwide (although it has recently become supplanted by the more effective Frantz ® Magnetic Barrier Laboratory Separator). Following are just a few key points regarding our unique approach:
Chat
Service Provider of Frantz Isodynamic Mineral Separation Equipments - Permanent Magnet Separators, Laboratory Separators, Electromagnetic Separators offered by AKV Enterprises, Dehradun, Uttaranchal.
Chat
Frantz ® Canister Separator S. G. Frantz Co. Inc. offers laboratory separators and auxiliary equipment for: Continuous precise magnetic separation of dry materials by either paramagnetic or diamagnetic susceptibility, also by ferromagnetic properties
Chat
Frantz Isodynamic Laboratory Separator - Model L-1 Our Isodynamic laboratory separators make sensitive separations of minerals or other grains according to magnetic susceptibility, even of materials not usually thought of as magnetic.
Chat
The Frantz Isodynamic ® Separator (Model L-1), used in virtually all of the geological laboratories of the world, was designed for the separation of mineral samples in dry form. It utilizes an electromagnet to separate according to magnetic susceptibility. The L-1 offers two distinct operating modes.
Chat
The Frantz Isodynamic Magnetic Separator (FIMS) is a versatile instrument and can produce excellent concentrates of many minerals. Substantial literature has been published on the subject of mineral separations performed with the FIMS [Citations omitted].
Chat
Title: C:Documents and SettingsNelson EbyDesktopHeavy Minerals and Magnetic Separation.wpd Author: Nelson Eby Created Date: 12/28/2007 2:51:55 PM
Chat
The most commonly used magnetic separator is the Frantz Isodynamic Magnetic Separator. It consists of a large electromagnet, through which mineral mixtures are passed on a metal trough. By varying the strength of the magnetic field or the slope of the tough, different minerals can be separated.
Chat
Frantz Isodynamic Magnetic separator, Model L-1, table top. Input 115 Volts, 2.5 AMPS, 50/60 Hz, serial number 1770. Note: This is a dry high intensity magnetic separator. Used in minerals research and development lab. Additional Prep Fees May Apply
Chat
Frantz ® Canister Separator S. G. Frantz Co. Inc. offers laboratory separators and auxiliary equipment for: Continuous precise magnetic separation of dry materials by either paramagnetic or diamagnetic susceptibility, also by ferromagnetic properties
Chat
A new magnetic separator has been made available recently in quantity to research laboratories. This device, the Frantz Isodynamic Separator, has been used for the separation of various non- sulphides from each other. Its application to the separation of sulphides, however, does not seem to have been reported.
Chat
Advantages of S.G. Frantz® Electromagnetic Separators Our Electromagnetic Separators offer several unique advantages over other separators, including: Matching Fields Fields to magnetize the collecting elements can be matched to the separation requirements, from about 1 through 2.5 kilogauss in the empty separating space.
Chat80 Years of Excellence. For more than 80 years, S.G. Frantz® has been manufacturing Magnetic Separators for the removal of fine magnetic particles from liquids, slurries, gases, dry granular materials and powders. By leveraging our extensive knowledge and expertise, we have been able to continually develop and improve upon the technology of our products.
Chat
Isodynamic Toll free 800-227-7642 Ph. 215-943-2930 Fax 215-943-2931 [email protected] HOME Electromagnetic Separators Fluids & Slurries Dry Materials Rectifiers Permanent...
ChatThe device used to separate minerals based on their magnetic properties is called a Frantz Isodynamic Magnetic Separator. The magnetic separator consists of a large electromagnet through which mineral mixtures can be passed on a metal trough which is divided near its exit end.
Chat
